企业车辆广告涂装设计
结合车型与预算规划车身信息、版式和材料,形成施工简报,并提示当地合规事项需确认。
完整提示词
<context>
A business vehicle is a moving sign read for a few seconds by people at a junction, in a car park, or behind it in traffic. It needs to say who you are, what you do and how to reach you, nothing more. Typical failures: a list of ten services, a phone number in a thin font, a slogan that says nothing about the trade, text that runs across door gaps, handles, rivets and windows, a design laid out on a flat rectangle that distorts over the wheel arches, and a left side that mirrors the right so the logo reads towards the back. The rear doors are read by drivers stuck behind the vehicle, which makes the rear the best place for a phone number or web address. Cut vinyl lettering on a coloured van is often cheaper and cleaner than a full printed wrap.
</context>
<task>
Design vehicle graphics for this business: {{business}}
<vehicle>
{{vehicle}}
</vehicle>
{{#budget}}Budget or preference: {{budget}}{{/budget}}
If the make, model and year are missing, ask for them and stop: the installer's template for that exact vehicle decides the layout.
1. **Message.** The name, a three-to-five-word description of the trade, one contact route (the easiest to remember) and optionally the area served. List what to leave off and why.
2. **Coverage choice.** Compare cut vinyl lettering, partial wrap (for example rear half or graphic band) and full wrap for this vehicle and budget, on cost level (relative, not prices), impact, durability, removal for leased vehicles, and repair. Recommend one.
3. **Side-by-side layout.** For the driver side, passenger side and bonnet or front: positions of each element, avoiding door gaps, the sliding door track, handles, fuel cap, windows, rivets and deep curves; the logo and text reading forwards on both sides; elements high enough to be seen over parked cars.
4. **Rear.** Large phone number or web address, name and trade, readable from a following car; nothing across the door split that becomes unreadable when one door opens; clearance around lights, number plate, sensors and cameras.
5. **Typography and colour.** Bold, open typefaces, minimum letter heights for reading at about 10 to 20 m, high contrast against the vehicle's paint colour, and a test of the design at thumbnail size to judge it at distance.
6. **Vehicle constraints.** What to measure or request from the installer (vehicle template, panel lines), how graphics should behave over curves, and the fleet consistency rules if there are several vehicles of different models.
7. **Legal and safety checks.** Points to confirm locally: window film and perforated vinyl on side and rear windows, reflective materials, restrictions on markings that resemble emergency or police vehicles, lease or finance company permission, and insurance notification. Mark them as checks, not rules.
8. **Installer brief.** A short brief for the wrap or signwriting company with vehicle details, design files expected, materials (cast versus calendered film for curves), lamination, and a proof on the vehicle template before printing.
</task>
<constraints>
- Do not invent phone numbers, web addresses, accreditation badges or reviews; use placeholders.
- Never imitate emergency-service, police or official vehicle liveries.
- Give relative cost levels, not prices; prices vary by country and installer.
{{> output/uncertainty}}
</constraints>
<output_format>
Markdown with the contract's sections in order. Coverage choice as a comparison table. Side-by-side layout as a table (Side, Element, Position, Size, Avoid). Legal and safety checks and the installer brief as checklists.
</output_format>可替换内容
- {{business}}
- {{vehicle}}
- {{#budget}}
- {{budget}}
- {{/budget}}
- {{> output/uncertainty}}
分类与标签
设计创意、车身广告、车辆涂装、品牌视觉、施工简报