编写可执行的质量检查清单
针对待检产品整理可测量的验收项目、抽检频率、缺陷处置规则和现场记录表。
完整提示词
<context>
A quality checklist works only if two inspectors looking at the same item reach the same verdict. That means every check is observable or measurable ("gap between door and frame 2-4 mm, feeler gauge", not "door fits well"), says the method and tool, and names what happens on a fail. Experienced quality people separate defects by consequence: critical (safety, legal, or the item cannot be used), major (likely to cause a return or complaint) and minor (cosmetic, within what customers accept), and they set different rules for each, typically zero tolerance for critical. They also check the things that caused past complaints first, use limit samples or photos for appearance checks, and record results so trends show up. Novices write long lists of vague checks, inspect everything at the end where defects are expensive, and have no rule for what to do with a batch that fails.
</context>
<task>
Output being checked:
<output_checked>
{{output_checked}}
</output_checked>
{{#requirements}}Requirements and known problems:
<requirements>
{{requirements}}
</requirements>{{/requirements}}
{{#volume}}Volume and inspectors: {{volume}}{{/volume}}
1. State the scope: what is inspected, at which stage, by whom, and what is out of scope.
2. Write the checklist grouped by characteristic (identity and labelling, dimensions or quantity, function, appearance, packaging, documents). For each check give: what to check, the acceptance criterion with tolerance, the method and tool, and the defect class.
3. Put checks linked to past complaints or safety first and mark them.
4. Where a criterion is subjective (colour, finish, cleanliness), describe a limit sample or reference photo to agree, instead of an adjective.
5. Propose sampling and frequency: 100% for critical characteristics, and a sampling approach for the rest scaled to the volume given. If a formal sampling plan is needed, say so and leave the numbers as `[CONFIRM]` rather than guessing a standard table.
6. Write decision rules: pass, hold and quarantine, rework, reject, and who decides on concessions. Include what to do with items made since the last good check.
7. Add a record sheet layout that captures date, lot or job, inspector, results and actions.
8. List every value you could not take from the requirements as a point to confirm.
</task>
<constraints>
- Never invent tolerances, dimensions, legal limits or customer specifications. Use `[CONFIRM: what is needed]`.
- Every check must be observable or measurable by the named inspector with the named tool. Rewrite vague checks.
- Keep the checklist usable at the workstation: at most about 25 checks; move the rest to a periodic audit if needed.
- If the output involves food, electrical, medical, child or lifting safety, flag that sector rules may apply and must be confirmed with the relevant standard or regulator.
{{> output/uncertainty}}
</constraints>
<output_format>
## Scope
## Inspection checklist
Table: # | Check | Criterion and tolerance | Method and tool | Class (critical / major / minor).
## Defect classes
Short definitions with one example each from this output.
## Sampling and frequency
## Decision rules
Table: Result | Action | Who decides.
## Record sheet
Column layout for the log.
## Points to confirm
Numbered list.
</output_format>可替换内容
- {{output_checked}}
- {{#requirements}}
- {{requirements}}
- {{/requirements}}
- {{#volume}}
- {{volume}}
- {{/volume}}
- {{> output/uncertainty}}
- [CONFIRM]
- [CONFIRM: what is needed]
分类与标签
办公效率、质量管理、产品检验、抽样检查、现场记录